While automatic pairing of Ubuntu to the keyboard is as you might expect, pairing with the Trackpad is not quite so intuitive, until you realise what may be happening. The Long Term Stable version of Ubuntu supports the Apple wireless Keyboard and the wireless Trackpad. Support for Magic Trackpad on Ubuntu 12.04 LTS (Precise Pangolin) on iMac 27¨ (2013 revision) As of September 8th, with the unsupported 2.6.35 (Maverick) kernel from the Ubuntu Kernel Team PPA, all expected basic functionality (two-finger scrolling, tap to click, right and middle click emulation through two and three finger taps respectively) works by using the "synaptics" X driver. There should be no output after the above command, however your trackpad should now be recognized and act as a single-touch device.īy default, it's possible to pair the Magic Trackpad and use basic mouse-like functionality with the regular left-click being available via the physical click only tapping and scrolling will not work. Then we can use the "XX." string to request pairing of the trackpad: The bluez-compat package needs to be installed before requesting pairing: $ sudo apt-get install bluez-compat The above output has important information. XX:XX:XX:XX:XX:XX Apple Wireless Trackpad Note you must press the pairing/ON/OFF button for approximately 10 seconds on your Magic Trackpad for it to enter "pairing" mode. Next, let's scan for nearby Bluetooth devices. The above example output shows what you would see if / when your Bluetooth radio is detected and enabled. Open a terminal window and issue the following command: $ hcitool dev See also: 's Apple Magic Mouse on 10.10 Maverick Meerkat and bluez bug #61838.įirst, verify that your Bluetooth radio is indeed on. Where is a backslash-escaped physical device ID, like D8\:30\:62\:38\:18\:02, and is your device's unique ID, both from the output of lsinput. Sudo gedit pincodes Add this line to the new file, save, and exit: 0000 # You can use TAB to complete, if it's the only Bluetooth device on your system: If you find that you are not being prompted to "Always grant access" and that the device is not available after a reboot ( i.e., you have to reconnect), try adding the pincode for the device (0000) to /var/lib/bluetooth//pincodes, like so:ĭetermine the physical (model-specific) and unique device IDs from the output of lsinput (from the "input-tools" package) as shown above.Ĭreate /lib/bluetooth//pincodes as the root user (or with sudo): # This folder *should* already exist, create it with 'sudo mkdir' if not. Problem: Pairing does not persist between reboots on Maverick (10.10) If the above instructions fail, see below for manual Bluetooth pairing instructions. Once these steps have been completed the trackpad will remain available in Ubuntu. Make sure the "Always grant access" checkbox is ticked and click on Grant: You will then be asked to confirm authorization to connect from this device. You can do so by going to the Bluetooth applet and choosing Apple Wireless Trackpad > Connect: Once this has been done you need to permanently authorize this device to pair with your system. You need to provide 0000 as the PIN code and press Enter to pair the trackpad. Such pairing can be forced by pressing and holding the button at the top-right side of the tablet. Once you have inserted batteries in your Magic Trackpad, if your system is Bluetooth-capable and its radio is enabled, you will see a dialog box asking for a PIN to pair it: Once you've confirmed the above, you can try using PyMT. The input device number would be 7.įor more information on testing this device for multi-touch support, see Multitouch/Testing. In this case the input device would be /dev/input/event7. Here is example output for lsinput with a Magic Trackpad present (other irrelevant input device removed): $ sudo lsinput In order to use this device with other multi-touch software, you will need to know its input device name and number. You can confirm that gestures are recognized by following the directions here: The following setup instructions only need to be followed once, then Ubuntu will recognize the Magic Trackpad without further configuration.Īlso note the nubs on the underside of the trackpad act as the mouse button - the two rubber pieces act as such when you press *on* the device itself. It can be used as a single-touch device in Ubuntu by pairing it using the Bluetooth utilities in Ubuntu. The Magic Trackpad is a multi-touch trackpad produced by Apple Inc. Using Ginn for multi-touch gesture inputs.Support for Magic Trackpad on Ubuntu 12.04 LTS (Precise Pangolin) on iMac 27¨ (2013 revision).Problem: Pairing does not persist between reboots on Maverick (10.10).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |